WirelessPLATFORM Pack

 

 

 

The WirelessPLATFORM kit includes both the Rx PCB and Tx PCB. They are available as “PCBs Only” or “As Kit” which includes a wireless Tx Rx pair in either 315Mhz or 433Mhz. These boards can be used to send serial information in one direction (per set), or could be used to send from one Tx board and receive on multiple Rx boards (or opposite). A basic operation could be to send directional information to a robot to make an remote control car.

Kit Includes:

1              RF LINK Transmitter 315 / 434MHz
1              RF LINK Reciver 315 / 434MHz
4              10 Way Stackable Female Header
4              6 Way Stackable Female Header
2              WirelessPLATFORM TxRx

Example Code Transmitter:

setfreq m16
#PICAXE 14m2
 
' SYMBOL P1	= +V		SYMBOL P20 = 0V
 SYMBOL P2	= C.5		SYMBOL Tx 	= B.0
 SYMBOL PUSH= pinC.4	SYMBOL P18 	= B.1
 SYMBOL P4  = C.3		SYMBOL Tx2Pwr= B.2
 SYMBOL P5= C.2		SYMBOL TxPwr = B.3
 SYMBOL P6	= C.1		SYMBOL P15 	= B.4
 SYMBOL P7	= C.0		SYMBOL HPOT	= B.5
 
 
SYMBOL Vmem = b0
SYMBOL Hmem = b1
SYMBOL but  = b2
SYMBOL Pack = b3
SYMBOL BAUD	= N2400_4
 
 
main:
 
'	readADC HPOT, Hmem
'	ReadADC VPOT, Vmem 
 
	let Hmem = Hmem + 1	'whilst no joystick is connected for testing
 
	if PUSH = 1 then 
		let but = 1
	else
		let but = 0
	endif 
 
	let pack = pack + 1 
 
	High TxPwr
	serout Tx, BAUD,(85,85,85,85,85,85,85,85,85,85,85,85,"433", Vmem,Hmem, but)
	'sertxd (85,85,85,85,85,85,85,85,85,85,85,85,"433", Pack, but)
	pause 5
	low TxPwr
 
	goto main

 

Example Code Receiver:

Setfreq m16
#PICAXE 20m2
 
'SYMBOL P1	= +V		SYMBOL P20 = 0V
'SYMBOL P2	= SerialIn	SYMBOL Tx  = SerialOut
 SYMBOL P3	= C.7		SYMBOL P18 = B.0
 SYMBOL PUSH  = PinC.6	SYMBOL P17 = B.1
 SYMBOL Rx	= C.5		SYMBOL P16 = B.2
 SYMBOL P6	= C.4		SYMBOL P15 = B.3
 SYMBOL P7	= C.3		SYMBOL P14 = B.4
 SYMBOL P8	= C.2		SYMBOL P13 = B.5
 SYMBOL P9	= C.1		SYMBOL P12 = B.6
 SYMBOL P10	= C.0		SYMBOL P11 = B.7
 
SYMBOL vmem   = b0
SYMBOL hmem   = b1
SYMBOL but 	  = b2
 
SYMBOL Baud = N2400_4
 
Main:
	serin [200,main], Rx, baud,("433"), vmem,hmem,but
 
	debug				'Use debug to recieve test data
'	sertxd (vmem,", ",hmem)	'OR
'	sertxd (13,10)		'Use serial terminal to recieve test data.
 
	goto main

 

Order WirelessTxRx